Learn when hot-water pressure washing saves labor, when cold water works just as well, and how to avoid surface damage and runoff trouble.
Hot Water vs Cold Water Washers: When Heat Actually Matters on a Property
Browsing Category
Pressure Washing
31 posts
Vinyl Fence Washing Without Streaks, Lance Marks or Blown Caps
Clean vinyl fencing without stripes, wand marks, damaged sheen, trapped water, or flying post caps using a safer low-pressure method.
Turbo Nozzles Explained: What Rotary Tips Do That Fixed Tips Cannot
Learn where rotary tips beat fixed sprays, how to match PSI and GPM, and how to avoid costly surface damage.
Cleaning Paver Patios: Pressure Settings, Joint Sand Loss and Resanding
Clean paver patios without scars or loose joints. Learn safe pressure settings, sand-loss limits, resanding steps, and sealer timing.
Pump Crankcase Oil on Gas Washers: Intervals, Type and the Milky Warning
Learn pump-oil intervals, approved types, safe change steps, and why milky oil can warn of water intrusion and failing seals.
Electric Pressure Washer Trips the Breaker: Circuits, Cords and Amp Draw
Find whether amp draw, a shared circuit, an extension cord, GFCI leakage, or a pump fault is stopping your pressure washer.
Winterizing a Pressure Washer: Pump Saver, Antifreeze and Freeze Damage
A $10 can of pump saver or a jug of RV antifreeze beats a $300 pump replacement. Here’s how to winterize a pressure washer the right way.
Oil Stains on Concrete: Degreasers, Dwell Time and Realistic Expectations
Which degreaser actually removes oil stains on concrete, how long to let it dwell, and what results to expect — honest answers from a property-care pro.
Foam Cannons on Pressure Washers: Orifice Matching and Dilution That Works
Your foam cannon isn’t broken — it’s mismatched. Match the orifice to your GPM, nail both dilutions, and get thick foam on any pressure washer.
Washing Wood Decks Without Furring the Grain: Pressure, Tips and Distance
The right PSI, tip, and wand distance to clean cedar, pine, and hardwood decks without furring the grain — plus the fix if the fuzz already showed up.
