TL;DR
Aqara has released a software feature that lets its Hub M3 bridge supported security cameras into Matter, allowing compatible smart-home platforms to discover them without replacing the cameras. The G100 is currently the only officially listed model, and Aqara has not announced when support for other cameras will arrive.
Aqara has released a software update that lets its Hub M3 connect supported security cameras to the Matter smart-home standard, so compatible platforms can discover the cameras without owners replacing them. Aqara currently lists the Camera G100 as supported, and limits each Hub M3 to four bound cameras.
Get business pricing on tools and workshop supplies
- Business-only prices and quantity discounts
- Tax-exempt purchasing
- Multiple users, one account, clear invoices
Users configure the feature in the Aqara app by selecting a camera in the device settings and binding it to the Hub M3. The camera then appears as an endpoint under the hub’s Matter bridge. According to Matter Alpha’s report, platforms including Home Assistant and SmartThings can discover a bound camera.
The feature requires updated firmware on both the Hub M3 and Camera G100. Matter Alpha reports that its early tests produced local video streams through the Open Home Foundation Matter Server and SmartThings, but that streams failed to load in Home Assistant Core. That test result is not confirmation of a general failure across Home Assistant setups.
Aqara’s feature description refers to both cameras and doorbells, but the G100 is the only model officially listed so far. The report says users can bind no more than four supported cameras per Hub M3. Aqara has not provided a timetable for adding other models.
Existing Cameras Join Matter
Bridging gives owners of supported cameras a way to bring them into a Matter-connected smart home without buying a replacement camera solely to gain compatibility. It may also provide a route for older or proprietary camera hardware to work with additional platforms, subject to device support and how each platform handles video.
The hub performs the bridging rather than requiring each camera to run Matter directly. Matter Alpha describes this as a way to avoid placing the processing and development costs of a native Matter camera stack on lower-cost devices. That is a potential benefit for manufacturers and buyers, not a guarantee that every existing camera will become compatible.
The practical value will depend on the camera models Aqara supports, the platforms that can display their streams and how reliably those streams work. For now, the feature is narrow: Aqara lists one camera model, and the report notes a problem in one Home Assistant test environment.
Popular right now

Vitamix VX1 Professional-Grade Blender, 64 oz, Black

Ninja CREAMi 7-in-1 Ice Cream Maker, NC301

TCL F8D Series 50-Inch 4K QLED Smart Fire TV
As an affiliate, we earn on qualifying purchases.
How Aqara’s Bridge Works
Matter allows compatible smart-home devices from different brands to work with supported platforms. In Aqara’s setup, the Hub M3 acts as a Matter bridge: a camera is connected to the hub and exposed to other Matter ecosystems, instead of running a native Matter camera implementation on its own.
Matter Alpha reports that community software such as Matterbridge has also been used to connect standard RTSP cameras to Matter. Aqara’s update applies the bridging approach to the company’s own hub and supported devices. The report discusses rising chipset costs and the resources needed for video processing as reasons manufacturers may find native camera support costly; those observations provide industry context, not a confirmed explanation from Aqara for this update.
““Currently, the G100 is the only camera officially listed as supported.””
— Matter Alpha report
Support Beyond the G100
Compatibility beyond the G100 is unconfirmed. Aqara has not announced which other cameras or doorbells will be supported, or when any additional models might be added. The report’s suggestion that the G410 Doorbell Camera Hub could receive support is speculation, not an announced plan.
It is also unclear whether the Home Assistant Core stream issue described in early testing affects other users, configurations or software versions. The report does not establish its cause or provide a fix timeline. Aqara has not stated whether the four-camera limit will change.
Firmware and Model Updates
Owners of a Hub M3 and Camera G100 can check the Aqara app for firmware updates and configure the bridge through the camera’s device settings. They should verify that their chosen Matter platform can discover the camera and display its stream; results may vary by platform.
The next key development would be an Aqara announcement naming additional supported cameras or doorbells. Until then, buyers should treat the G100 as the only officially listed camera and the four-camera-per-hub cap as the stated limit.
Key Questions
What does the Aqara Hub M3 update do?
It lets the Hub M3 bridge supported Aqara cameras into Matter, where compatible smart-home platforms can discover them.
Which camera is supported now?
The Camera G100 is the only model Matter Alpha reports as officially listed for the feature. Support for other models has not been announced.
Do I need to replace my camera?
Not if you have a supported camera and the required Hub M3. The camera must be updated and configured through the Aqara app; the feature does not make every existing camera compatible.
How many cameras can one Hub M3 connect?
The reported limit is four supported cameras per Hub M3.
Does the camera stream work in Home Assistant?
Matter Alpha reported that streams failed to load in its early Home Assistant Core test, while its setup worked through the Open Home Foundation Matter Server and SmartThings. The report does not establish how widespread the issue is.
Source: matteralpha.com
