The best compact track loaders balance a small footprint with enough power and attachment flexibility for the work you actually do. I’d put the DigMaster DS360 at the top for its 23 HP stand-on format, while the DigMaster 24 HP 4-in-1 stands out for buyers who want a versatile bucket and the Wolfequip 23 HP for shoppers seeking a bucket-and-auger combination. The main tradeoffs are engine output, machine layout, attachment compatibility, and how much support and service information you can confirm before buying. A higher horsepower figure alone does not tell you how much material a machine can move or which attachments it can run. Read on for the full breakdown and the factors I’d check before choosing.
Get business pricing on tools and workshop supplies
- Business-only prices and quantity discounts
- Tax-exempt purchasing
- Multiple users, one account, clear invoices
Complete the kit
Key Takeaways
- The DS360 ranks first because its 23 HP stand-on configuration presents a useful middle ground between the 13.5 HP DigMaster entry model and the 24 HP machines.
- Four-in-one buckets distinguish two options: the DigMaster 24 HP and DigSwift 24 HP models may suit buyers who value bucket versatility, but attachment details and compatibility still need checking.
- The Wolfequip package has a different appeal: a bucket and auger are listed together, making it a more direct fit for buyers planning both material handling and hole drilling.
- Power figures cluster tightly: most listed machines are rated around 23–24 HP, so layout, controls, attachments, and support may matter more than a one-horsepower difference.
- Specifications leave meaningful gaps: rated operating capacity, machine width, hydraulic flow, and service coverage are not established by the product names, so buyers should verify them before ranking these machines for a specific job.
| DigMaster Mini Skid Steer Loader, 13.5 HP Gas, Stand-On | ![]() | Best Compact Pick | Engine: RATO-R420 gasoline, 13.5 HP, 420 cc | Starting: Electric start | Operating weight: Approximately 1,521 lb | VIEW LATEST PRICE | See Our Full Breakdown |
| DigMaster DS360 Mini Skid Steer Loader, 23 HP Gas-Powered Stand-On Compact Track Loader | ![]() | Best for Heavier Loads | Engine: 23 HP twin-cylinder gas engine | Hydraulic system: Double pump | Lifting capacity: 1,765 lb | VIEW LATEST PRICE | See Our Full Breakdown |
| ATS Power T460 Mini Track Skid Steer Loader with 43.8-Inch Bucket | ![]() | Best for Faster Bucket Cycles | Engine: RATO 740 gasoline, 22–25 HP | Lifting capacity: Up to 840 lb | Bucket width: 43.8 in | VIEW LATEST PRICE | See Our Full Breakdown |
| PWBULL JS450 Mini Track Skid Steer Loader, 23 HP | ![]() | Best for Attachment-Focused Work | Engine: 23 HP twin gasoline engine | Hydraulic system: 3-pump, 3-valve | Hydraulic tank capacity: 26 L | VIEW LATEST PRICE | See Our Full Breakdown |
| DigMaster Mini Track Skid Steer Loader, 24 HP Gas Engine, 4-in-1 Bucket, Yellow | ![]() | Best with a Versatile Included Bucket | Engine: 24 HP twin-cylinder gasoline | Hydraulic system: Triple pump, triple valve | Included attachment: 4-in-1 bucket | VIEW LATEST PRICE | See Our Full Breakdown |
| Wolfequip 23 HP Mini Skid Steer Loader with Bucket and Auger | ![]() | Best for Auger-Ready Work | Engine: 23 HP air-cooled gas | Lifting capacity: 840 lbs | Travel speed: 6 km/h | VIEW LATEST PRICE | See Our Full Breakdown |
| ATS Power T460P Mini Triangular Track Skid Steer Loader with 43.8-Inch Bucket, 23 HP | ![]() | Best for Bucket-First Material Handling | Engine: 23 HP; listed as GBZS 680, with RATO 740 also named in features | Lifting capacity: 770 lbs standard; 840 lbs also listed | Bucket width: 43.8 inches | VIEW LATEST PRICE | See Our Full Breakdown |
| DigSwift 24 HP Compact Mini Skid Steer Loader with 4-in-1 Bucket | ![]() | Best for Narrow Access | Engine: 24 HP RATO; 3600 RPM | Maximum lift/unload capacity: 727.5 lbs | Working speed: 0–6 km/h | VIEW LATEST PRICE | See Our Full Breakdown |
| DigMaster DM-380-SHY Mini Skid Steer Loader, 24 HP Gas, Stand-On | ![]() | Best for Uneven-Ground Traction | Engine: 24 HP twin-cylinder gasoline | Bucket: 4-in-1 | Hydraulic system: Triple pump, triple valve | VIEW LATEST PRICE | See Our Full Breakdown |
| HUAYEE HY480C 23 HP Gas-Powered Mini Skid Steer Loader | ![]() | Best for Higher Stated Lift Capacity | Engine: 23 HP, 739 cc twin-cylinder air-cooled gas; electric start | Maximum lifting capacity: 1,765 lbs (800 kg) | Bucket capacity: 0.15 m³ | VIEW LATEST PRICE | See Our Full Breakdown |
| compact track loader | Engine | Dimensions | Hydraulic system | Item weight |
|---|---|---|---|---|
| DigMaster Mini Skid Steer Load | RATO-R420 gasoline, 13.5 HP, 420 cc | 72.05 × 47.64 × 51.97 in | — | — |
| DigMaster DS360 Mini Skid Stee | 23 HP twin-cylinder gas engine | 74.8 × 47.64 × 60.24 in | Double pump | 1,433 lb |
| ATS Power T460 Mini Track Skid | RATO 740 gasoline, 22–25 HP | — | — | 1,151 lb |
| PWBULL JS450 Mini Track Skid S | 23 HP twin gasoline engine | — | 3-pump, 3-valve | — |
| DigMaster Mini Track Skid Stee | 24 HP twin-cylinder gasoline | 83 × 44 × 52 in | Triple pump, triple valve | 1,818 lb |
| Wolfequip 23 HP Mini Skid Stee | 23 HP air-cooled gas | 77 × 43 × 51 inches | — | — |
| ATS Power T460P Mini Triangula | 23 HP; listed as GBZS 680, with RATO 740 also named in features | 87 × 42.2 × 50.8 inches | — | — |
| DigSwift 24 HP Compact Mini Sk | 24 HP RATO; 3600 RPM | 80.7 × 39.4 × 51.2 inches | — | 1600 lbs |
| DigMaster DM-380-SHY Mini Skid | 24 HP twin-cylinder gasoline | 84 × 45 × 53 inches | Triple pump, triple valve | 1,818 lbs |
| HUAYEE HY480C 23 HP Gas-Powere | 23 HP, 739 cc twin-cylinder air-cooled gas; electric start | 92 × 44 × 50 inches | Triple pump and triple valve; 17 MPa | — |
More Details on Our Top Picks
DigMaster Mini Skid Steer Loader, 13.5 HP Gas, Stand-On
I’d choose this DigMaster when working footprint and low ground pressure matter more than lifting capacity. At 72.05 inches long and 47.64 inches wide, it suits access routes where a larger machine may be awkward, while its tracked undercarriage and listed 22.5 kPa ground pressure help on soft or uneven ground. The 5.3 cu. ft. bucket handles basic loading and grading, and the universal quick-attach gives buyers a route to other compatible implements.
Compared with the DigMaster DS360, this model has a much less powerful 13.5 HP engine and no listed lifting capacity, so I’d favor the DS360 for heavier handling. The tradeoff here is a simpler, smaller machine with a stand-on platform, plus some setup work: the control handles arrive detached, and tasks beyond bucket work call for separately sourced attachments.
Pros:- Compact 72.05 × 47.64-inch dimensions suit confined access routes.
- Tracked design and listed 22.5 kPa ground pressure support work on soft or uneven terrain.
- Universal quick-attach system allows use with compatible implements.
- Ships largely preassembled with setup hardware and liftgate delivery.
Cons:- The 13.5 HP engine is less powerful than the 23 HP DS360.
- Control handles require installation after delivery.
- Attachments for work beyond the included bucket may need to be purchased separately.
Best for: Property owners and small-site contractors who need a narrow tracked loader for light material handling, grading, and work on soft ground.
Not ideal for: Operators moving heavy loads or expecting a stated lifting capacity; the DS360 is a stronger choice for that work.
- Engine:RATO-R420 gasoline, 13.5 HP, 420 cc
- Starting:Electric start
- Operating weight:Approximately 1,521 lb
- Dimensions:72.05 × 47.64 × 51.97 in
- Bucket capacity:5.3 cu. ft.
- Maximum loading height:88.9 in
- Maximum travel speed:2.5 mph
- Attachment system:Universal quick-attach
Our verdict“Choose this DigMaster for light-duty jobs in tight spaces where compact size matters more than high lifting capacity.”
DigMaster DS360 Mini Skid Steer Loader, 23 HP Gas-Powered Stand-On Compact Track Loader
The 23 HP twin-cylinder engine and listed 1,765 lb lifting capacity make the DS360 the clearest pick here for buyers who need a compact machine to handle substantial loads. Its double-pump hydraulic system pairs with a stand-on layout, so it brings more muscle than the 13.5 HP DigMaster without giving up the access and visibility that make mini loaders useful in confined areas. Rubber tracks and a reinforced manganese-steel frame are aimed at rough or muddy work.
Compared with the ATS Power T460, the DS360 lists a higher lifting capacity, while the T460 provides a wider 43.8-inch bucket and a listed 60-inch dumping height. The DS360’s main compromises are practical: its 1,433 lb weight can narrow transport options, and the gasoline engine needs fuel and routine engine care. I’d pick it for load handling, not for the lightest possible transport setup.
Pros:- Listed lifting capacity of up to 1,765 lb suits heavier material handling.
- 23 HP twin-cylinder gas engine provides more power than the 13.5 HP DigMaster.
- Double-pump hydraulic system supports loader work.
- Rubber tracks and reinforced manganese-steel frame are suited to rough or muddy sites.
Cons:- At 1,433 lb, it may exceed the transport capacity available to some owners.
- Gas operation requires fuel and regular engine maintenance.
- The provided specifications do not list bucket capacity or dumping height.
Best for: Small contractors and property managers who regularly move heavy materials in areas that cannot accommodate a full-size loader.
Not ideal for: Buyers with limited trailer or vehicle capacity, or those who need a clearly stated bucket width and dumping height before choosing.
- Engine:23 HP twin-cylinder gas engine
- Hydraulic system:Double pump
- Lifting capacity:1,765 lb
- Item weight:1,433 lb
- Dimensions:74.8 × 47.64 × 60.24 in
- Tracks:Rubber
- Frame material:Manganese steel
Our verdict“Choose the DS360 if lifting capacity is your priority and your transport setup can handle its weight.”
ATS Power T460 Mini Track Skid Steer Loader with 43.8-Inch Bucket
The T460 stands out for a combination of wide bucket coverage and a listed 9-second lift-dump-return cycle. Its 43.8-inch bucket can cover more ground per pass than the 5.3 cu. ft. bucket specified for the smaller DigMaster 13.5 HP, while the T460’s 60-inch dumping height gives buyers a defined clearance figure for loading. At 1,151 lb, it is also the lightest machine among these five by listed item weight, a useful advantage when transport capacity is tight.
That lighter build comes with a real limitation: its stated lifting capacity is up to 840 lb, well below the DS360’s listed 1,765 lb. The 22–25 HP RATO 740 engine and 20-gallon hydraulic oil tank are aimed at sustained work, but the listing gives fuel tank capacity in pounds, making that figure hard to compare with other machines. I’d favor the T460 for bucket-focused jobs, not heavy lifting.
Pros:- 43.8-inch bucket covers a broad working path.
- Listed 9-second lift-dump-return cycle supports repeated bucket work.
- 60-inch dumping height provides a useful loading reference.
- At 1,151 lb, it has the lowest listed item weight of these five machines.
Cons:- Up to 840 lb lifting capacity is lower than the DS360’s listed capacity.
- Fuel tank capacity is specified in pounds, which makes comparison difficult.
- Maximum travel speed is listed as 6 km/h.
Best for: Landscapers and small-site crews who want a wide bucket, defined dumping height, and lighter listed machine weight for transport.
Not ideal for: Buyers who routinely lift loads near or above 840 lb; the DigMaster DS360 lists a much higher lifting capacity.
- Engine:RATO 740 gasoline, 22–25 HP
- Lifting capacity:Up to 840 lb
- Bucket width:43.8 in
- Dumping height:60 in
- Item weight:1,151 lb
- Travel speed:6 km/h
- Hydraulic oil tank capacity:20 gal
- Lift-dump-return cycle:9 seconds
Our verdict“Pick the T460 for bucket work and transport-conscious jobs, but choose the DS360 when lifting heavier loads matters more.”
PWBULL JS450 Mini Track Skid Steer Loader, 23 HP
The JS450’s three-pump, three-valve hydraulic system, quick-change hydraulic lines, and auto leveling make it a strong match for operators who switch implements or need the bucket to stay balanced during work. Its zero-turn design is aimed at tight sites, while triangle tracks give this stand-on loader a distinct undercarriage setup compared with the rubber-track DigMaster DS360. A 27 L fuel tank and cooling features also support longer work sessions between stops.
The tradeoff is weight: at 1,970 lb, it is the heaviest of these five by its listed weight, so I’d check trailer and loading capacity before choosing it. The DS360 has a stated 1,765 lb lifting capacity, while the JS450 listing provides no lifting figure, making direct load comparisons difficult. It also has no enclosed cabin, which leaves the operator exposed to weather and jobsite conditions.
Pros:- Three-pump, three-valve hydraulic system supports attachment-focused work.
- Quick-change hydraulic lines simplify implement changes.
- Zero-turn maneuverability suits confined areas.
- Auto leveling helps keep the bucket balanced.
Cons:- Listed weight of 1,970 lb can require a higher-capacity trailer and handling equipment.
- Stand-on design provides no enclosed operator cabin.
- No lifting capacity is included in the provided specifications.
Best for: Contractors who frequently change hydraulic attachments and need a zero-turn stand-on machine for confined job sites.
Not ideal for: Owners with limited trailer capacity or operators who need an enclosed cab or a published lifting-capacity figure.
- Engine:23 HP twin gasoline engine
- Hydraulic system:3-pump, 3-valve
- Hydraulic tank capacity:26 L
- Fuel tank capacity:27 L
- Tracks:Triangle tracks
- Listed weight:1,970 lb
- Features:Zero-turn, auto leveling, quick-change hydraulic lines, LED work lights
Our verdict“Choose the JS450 for hydraulic attachment flexibility and tight turns if its weight fits your transport setup.”
DigMaster Mini Track Skid Steer Loader, 24 HP Gas Engine, 4-in-1 Bucket, Yellow
I’d put this DigMaster on the shortlist for buyers who want a 4-in-1 bucket included rather than starting with a basic bucket and adding capabilities later. The 24 HP twin-cylinder engine and triple-pump, triple-valve hydraulics suit varied loading and material-handling tasks, while crawler tracks are intended for soft, uneven, or sloped ground. Compared with the 13.5 HP DigMaster, this model brings more engine power and a broader included bucket setup; unlike the ATS Power T460, its appeal is implement versatility rather than a listed bucket width and dumping height.
That range comes with weight and setup tradeoffs. At 1,818 lb, it is not the easiest option here to transport, and the control panel and levers arrive dismounted for installation. The stand-on platform offers visibility but no enclosed cab, so I’d skip it if weather protection is part of the job requirement. The listing also does not provide a lifting capacity, which makes heavy-load planning less certain than with the DS360.
Pros:- Included 4-in-1 bucket supports a wider range of tasks than a basic bucket.
- 24 HP twin-cylinder engine is more powerful than the 13.5 HP DigMaster.
- Triple-pump, triple-valve hydraulics support lifting, tilting, and auxiliary attachments.
- Crawler tracks are suited to soft and uneven terrain.
Cons:- At 1,818 lb, it may require substantial transport and loading capacity.
- Control panel and levers need installation after delivery.
- Stand-on design has no enclosed cab, and no lifting capacity is listed.
Best for: Small contractors and property owners who want an included multi-function bucket for varied material handling on uneven ground.
Not ideal for: Buyers who need an enclosed cab, easy transport, or a published lifting-capacity figure for planning heavier loads.
- Engine:24 HP twin-cylinder gasoline
- Hydraulic system:Triple pump, triple valve
- Included attachment:4-in-1 bucket
- Operating design:Stand-on
- Item weight:1,818 lb
- Dimensions:83 × 44 × 52 in
- Material:Manganese steel
Our verdict“Choose this DigMaster when the included 4-in-1 bucket and varied job tasks matter more than lighter transport or cab comfort.”
Wolfequip 23 HP Mini Skid Steer Loader with Bucket and Auger
The Wolfequip is the clearest pick here for buyers who want a mini loader and a drilling attachment in one package: it includes both a bucket and an auger. Its stated 840-pound lifting capacity matches the higher figure listed for the ATS Power T460P, though buyers should verify capacity at their intended working position. A 60-inch dumping height and hydraulic controls add useful flexibility for material handling and compatible tools. Compared with the DigSwift 24 HP, Wolfequip specifies its auger’s working pressure and required flow, making attachment fit easier to check before purchase. The tradeoff is that its 7–15 GPM flow requirement may limit which hydraulic attachments it can run, and the gas engine and hydraulic system both need routine service. Its 6 km/h travel speed is also modest for moving between work areas.
Pros:- Includes both a bucket and an auger.
- Stated 840-pound lifting capacity and 60-inch dumping height suit routine material handling.
- Hydraulic controls support compatible attachments.
- 77 × 43-inch footprint and 7 × 28-inch tires are suited to relatively tight access.
Cons:- Auger use requires compatible hydraulic flow of 7–15 GPM.
- Gasoline engine and hydraulic system require regular maintenance and fluid checks.
- Travel speed is limited to 6 km/h.
Best for: Landscapers and property-maintenance crews who need a compact loader for bucket work and occasional auger drilling, and can confirm attachment flow compatibility.
Not ideal for: Buyers who need faster travel between distant work areas or plan to run hydraulic attachments that require more than 15 GPM.
- Engine:23 HP air-cooled gas
- Lifting capacity:840 lbs
- Travel speed:6 km/h
- Dumping height:60 inches
- Cycle time:9 seconds
- Auger:950 N torque; 45 RPM
- Required hydraulic flow:7–15 GPM
- Dimensions:77 × 43 × 51 inches
- Included attachments:Bucket and auger
Our verdict“Choose the Wolfequip if an included auger is a priority and your other hydraulic tools fit its stated flow range.”
ATS Power T460P Mini Triangular Track Skid Steer Loader with 43.8-Inch Bucket, 23 HP
The ATS Power T460P is a bucket-focused choice for buyers who value a defined loading cycle over an attachment bundle. Its 43.8-inch bucket, 60-inch dumping height, and stated 9-second lift-dump-return cycle give a clearer picture of routine material handling than the DigSwift 24 HP’s more general attachment versatility. It also lists a 25-liter-per-minute hydraulic flow rate and a 20-gallon hydraulic oil tank, which may suit longer work periods, though buyers should confirm the tank specification with the seller. The main caution is inconsistent capacity data: the listing gives both 840 lbs and 770 lbs. I would not plan near the higher figure without written clarification. Like the Wolfequip, it tops out at 6 km/h; unlike that model, it does not list an auger as included. Its engine-brand details also vary across the supplied listing.
Pros:- 43.8-inch bucket is suited to routine loading and material movement.
- 60-inch dumping height supports loading into many low-sided containers.
- Listed 9-second lift-dump-return cycle helps set expectations for repeated bucket work.
- Hydraulic guided drive and compact stand-on format suit confined work areas.
Cons:- The listing gives conflicting lifting capacities of 840 lbs and 770 lbs.
- Engine brand information is inconsistent across the product details.
- 6 km/h travel speed may slow work spread across a larger site.
Best for: Small construction and landscaping crews whose main task is moving loose material with the included 43.8-inch bucket and who can verify rated capacity before purchase.
Not ideal for: Buyers who need a clearly stated lifting rating, a supplied auger, or higher travel speed between work zones.
- Engine:23 HP; listed as GBZS 680, with RATO 740 also named in features
- Lifting capacity:770 lbs standard; 840 lbs also listed
- Bucket width:43.8 inches
- Hydraulic flow rate:25 liters/minute
- Dumping height:60 inches
- Lift-dump-return cycle:9 seconds
- Travel speed:6 km/h
- Dimensions:87 × 42.2 × 50.8 inches
- Warranty:1 year
Our verdict“Pick the ATS Power T460P for bucket-centered work only after confirming its capacity rating and hydraulic tank details with the seller.”
DigSwift 24 HP Compact Mini Skid Steer Loader with 4-in-1 Bucket
At just 39.4 inches wide, the DigSwift is the narrowest option in this five-product group, making it the strongest fit for gates and confined paths where wider machines may not pass. It can be operated walk-behind or from its stand-on platform, a useful choice for operators who want to change position around tight work. Its 4-in-1 bucket and stated compatibility with augers, trenchers, grapples, and clamps give it broader task potential than the bucket-focused ATS Power T460P. The compromise is a lower stated maximum lift/unload capacity of 727.5 lbs than the 840-pound figures listed for the Wolfequip and ATS. DigSwift also provides no travel speed above 6 km/h, and walk-behind or stand-on operation offers less separation from the machine than an enclosed cab. Attachment fit should be checked against the listed connection dimensions before buying tools.
Pros:- 39.4-inch width suits narrow access routes.
- Walk-behind and stand-on operating positions offer flexibility in tight spaces.
- 4-in-1 bucket supports several material-handling tasks.
- Designed to accept compatible buckets, augers, trenchers, grapples, and clamps.
Cons:- 727.5-pound maximum lift/unload capacity is below the higher ratings listed for the Wolfequip and ATS Power T460P.
- Maximum working speed is 6 km/h.
- Walk-behind and stand-on operation provides no enclosed cab.
Best for: Property owners and small crews working through narrow gates or between buildings who want flexible operator positioning and a multi-purpose bucket.
Not ideal for: Operators who routinely handle heavier loads, need an enclosed cab, or expect to travel quickly across a large site.
- Engine:24 HP RATO; 3600 RPM
- Maximum lift/unload capacity:727.5 lbs
- Working speed:0–6 km/h
- Dimensions:80.7 × 39.4 × 51.2 inches
- Maximum working height:87.8 inches
- Maximum unloading height:64.96 inches
- Operation:Walk-behind or stand-on
- Attachment pin-hole spacing:364 mm
- Item weight:1600 lbs
Our verdict“Choose the DigSwift when fitting through narrow access matters more than lifting capacity or enclosed-operator protection.”
DigMaster DM-380-SHY Mini Skid Steer Loader, 24 HP Gas, Stand-On
The DigMaster DM-380-SHY is the terrain-oriented pick in this group: its crawler tracks are suited to soft or uneven ground where a small wheeled machine may struggle, and its 4-in-1 bucket can handle more than basic scooping. The triple-pump, triple-valve hydraulic system is designed to manage drive, lifting, and auxiliary functions, giving it a more work-focused setup than the DigSwift 24 HP, whose strongest advantage is narrow access. At 1,818 pounds and 45 inches wide, the DigMaster is also the heaviest and widest option among these five, so transport and access need planning. It arrives in a protective crate with forklift-ready pallet access, but the control panel and levers ship dismounted and require reassembly. The supplied details do not state lift capacity, travel speed, or dumping height, leaving key comparisons harder to make.
Pros:- Crawler tracks are suited to soft and uneven terrain.
- 4-in-1 bucket supports multiple material-handling tasks.
- Triple-pump, triple-valve hydraulics support drive, lift, and auxiliary functions.
- Protective crate has forklift-ready pallet access.
Cons:- At 1,818 pounds, it is the heaviest model in this five-product group and needs transport planning.
- Control panel and levers require reassembly after shipping.
- The supplied specifications do not state lifting capacity, travel speed, or dumping height.
Best for: Landscaping and property crews working on soft, muddy, sloped, or uneven ground who can transport and unload a heavier machine.
Not ideal for: Buyers with narrow access routes, limited transport equipment, or a need for published lifting and dumping figures before purchase.
- Engine:24 HP twin-cylinder gasoline
- Bucket:4-in-1
- Hydraulic system:Triple pump, triple valve
- Track type:Crawler tracks
- Item weight:1,818 lbs
- Dimensions:84 × 45 × 53 inches
- Power source:Gasoline
- Warranty:2 years
Our verdict“Choose the DigMaster DM-380-SHY for tracked traction and a versatile bucket on rough ground, provided you can manage its weight and assembly.”
HUAYEE HY480C 23 HP Gas-Powered Mini Skid Steer Loader
The HUAYEE HY480C stands apart on stated lifting capacity: its 1,765-pound maximum is well above the 727.5 pounds listed for the DigSwift and the 840-pound figures given for the Wolfequip and ATS Power T460P. That makes it the strongest candidate here for buyers moving heavier loads, although the listing does not explain the conditions behind that maximum, so I would confirm the rating and intended operating setup before relying on it. Its triple-pump hydraulics separate drive, lift, and auxiliary circuits, while a quick hitch makes attachment changes simpler than a setup where tools must be swapped manually. Rubber tracks and a stated 30-degree climbing capability suit varied ground. The tradeoff is a stand-on layout without an enclosed cab, plus a 44-inch width and compact bucket capacity that may not fit larger jobs. The included bucket is useful, but attachment compatibility still needs checking.
Pros:- Stated maximum lifting capacity of 1,765 lbs is the highest among these five listings.
- Triple-pump, triple-valve hydraulics separate drive, lift, and auxiliary functions.
- Quick hitch supports faster, tool-free attachment changes.
- Rubber tracks and stated 30-degree climbing capability suit varied ground.
Cons:- The listing does not explain the conditions behind its 1,765-pound maximum capacity.
- Stand-on operator position does not provide an enclosed cab.
- Included bucket capacity of 0.15 m³ may limit high-volume work.
Best for: Small contractors and landowners who need a compact tracked loader with a higher stated lift rating and frequent attachment changes.
Not ideal for: Buyers needing an enclosed cab, a narrower machine than 44 inches, or a large bucket for high-volume production work.
- Engine:23 HP, 739 cc twin-cylinder air-cooled gas; electric start
- Maximum lifting capacity:1,765 lbs (800 kg)
- Bucket capacity:0.15 m³
- Maximum unloading height:58 inches
- Hydraulic system:Triple pump and triple valve; 17 MPa
- Lift time:4.6 seconds
- Climbing capability:30 degrees
- Dimensions:92 × 44 × 50 inches
- Warranty:1 year
Our verdict“Choose the HUAYEE HY480C if its stated lifting capacity fits your needs and you value quick attachment changes over cab protection.”

How We Picked
I ranked these loaders around the details available in their product names: stated engine output, stand-on or triangular-track format, included bucket types, and named attachments. I gave more weight to clear job-fit signals than to horsepower alone, since a loader’s usefulness depends on whether its size, hydraulic system, and attachments match the work. The DS360 leads as a balanced 23 HP stand-on option; models with 4-in-1 buckets or an included auger earn specific-use roles rather than automatic overall preference.
Several buyer-critical specifications are not provided here, including rated operating capacity, operating weight, overall width, hydraulic flow, warranty terms, and dealer or parts support. I do not treat those missing details as proof of poor performance, but they limit confident comparisons. Before purchasing, I would request the manufacturer’s full spec sheet and written confirmation of attachment compatibility, service arrangements, and parts availability. The rankings reflect the information available, not hands-on testing.
Factors to Consider When Choosing Best Compact Track Loaders
Model names and engine ratings are only a starting point. I’d first match the machine to the tightest access point, heaviest routine load, and attachments you expect to use, then verify the specifications that determine whether it can do that work safely and repeatedly.
Match Rated Capacity to the Heaviest Routine Load
Start with the load you expect to move regularly, not the biggest task you might face once a year. Ask for rated operating capacity and tipping load, then check whether the stated capacity applies with the bucket or another attachment fitted. A machine that can physically lift a load is not automatically rated to carry it safely across uneven ground. Buyers often compare horsepower while overlooking this distinction. If the seller cannot provide capacity figures and the conditions behind them, treat that as a reason to pause and request documentation.
Measure Access Routes Before Choosing a Machine
Compact describes a broad class, not a guarantee that a loader will pass through your gate or fit between buildings. Measure the narrowest doorway, path, trailer ramp, and turning area, then compare those measurements with the loader’s overall width, length, height, and turning needs. Include the bucket or other attachment in your clearance plan. A narrower machine may reach more work areas, while a wider or heavier one could be easier to match with larger jobs and hauling equipment. Check transport weight and trailer requirements separately; a machine that fits a site may still exceed your towing setup.
Check Hydraulic Requirements Before Buying Attachments
Attachment compatibility involves more than whether a coupler appears to fit. Confirm hydraulic flow and pressure, connector type, electrical connections if required, and the loader’s approved attachment limits. An auger, trencher, or other powered tool can demand more hydraulic capacity than a basic bucket. A 4-in-1 bucket adds ways to grip, grade, and handle material, but its extra functions do not make every other attachment compatible. Ask for the approved attachment chart and verify the exact model numbers before treating a package as a ready-to-work system.
Choose a Layout That Fits the Operator and Workday
Stand-on controls can make it easier to mount and dismount repeatedly, which may suit landscaping or property work with frequent stops. That layout also leaves the operator more exposed to weather and debris than an enclosed cab, and control arrangements can vary between machines. Ask for a control diagram and, if possible, arrange a supervised demonstration before committing. Consider visibility, hand and foot control placement, vibration, and how the operator will manage longer shifts. A compact footprint is less useful if the controls or operator position make the machine tiring to run.
Compare Ownership Support, Not Just the Machine
A loader’s purchase decision should include parts access, service documentation, warranty coverage, and a realistic plan for routine maintenance. Ask who handles warranty claims, where replacement parts ship from, and whether common service items have published intervals. With lesser-known or direct-sale equipment, written answers matter because nearby dealer support may not be available. Also confirm what is included in the shipment and what arrives separately, including hoses, couplers, manuals, and attachments. A machine with a compelling attachment package can be a poor fit if repairs or replacement parts are difficult to arrange.
Compare the Complete Operating Cost
Look beyond the machine specification and account for fuel, routine service, transport, attachment purchases, and downtime. A lower-powered loader may suit light property work but fall short if it must run demanding tools for long periods; a higher-output model can bring added transport and maintenance demands. Estimate how many hours the machine will work each season and which jobs could be handled by a rental instead. Buyers sometimes pay for attachments they rarely use while missing the cost of a trailer or hydraulic upgrades. Build a list of required tasks first, then compare complete configurations rather than bare machine names.
Frequently Asked Questions
Is a 13.5 HP compact loader enough for regular property work?
It may be adequate for lighter jobs such as moving small amounts of soil, mulch, or debris, but horsepower does not establish lifting capacity or hydraulic capability. Ask for rated operating capacity, hydraulic flow, and the machine’s limits with your planned attachment. Compare those figures with the heaviest load and most demanding tool you expect to use regularly. If the figures are unavailable, I would not assume the machine can replace a larger loader. The 13.5 HP rating is best treated as a prompt to verify the complete specification sheet.
Should I choose a 4-in-1 bucket or buy separate attachments?
A 4-in-1 bucket can combine several material-handling tasks in one attachment, which may reduce the need to switch tools during a varied workday. Separate attachments can be better when a job calls for a specialized tool or when the bucket’s weight and hydraulic needs reduce the loader’s usable capacity. Ask how the attachment changes rated capacity and confirm the loader can supply the required hydraulics. Compare the tasks you perform most often rather than counting the bucket’s possible functions. For occasional specialized work, renting or buying a dedicated attachment may be the more practical route.
What should I verify before ordering a loader from a seller without nearby service?
Request the warranty terms, service manual, parts list, maintenance schedule, and contact details for the party handling repairs. Ask how quickly common wear parts can be supplied and whether technical support is available by phone or email. Confirm who pays freight for warranty parts and what documentation is required for a claim. It is also useful to identify a local mechanic who is willing to service the machine before delivery. A low purchase hurdle is not much help if a small failure leaves the loader idle for weeks.
How do I know whether a compact loader will fit my trailer and access path?
Compare the loader’s operating weight and dimensions with the trailer’s rated capacity, usable deck length, ramp rating, and tie-down points. Measure the narrowest access point at the worksite and account for mirrors, controls, bucket width, or other projections where applicable. Check overall height against doors and overhead obstructions, not just the machine’s published height without an attachment. Include the weight of the operator, fuel, and transported attachments when checking payload. If any measurement is close to a limit, get written dimensions for the exact configuration you plan to move.
When does a 23–24 HP model make more sense than the lower-powered option?
A 23–24 HP loader may be a better match when your work includes frequent heavy material handling or powered attachments, but engine rating alone cannot confirm that it will perform those jobs well. Hydraulic flow, rated operating capacity, machine weight, and cooling design also shape what the loader can do. For occasional light work, the extra engine output may not justify a larger or more demanding setup. Request performance specifications for the exact attachment and operating conditions you expect. Choose the higher-powered class when the full specification sheet supports your workload, not simply because its horsepower number is larger.
Conclusion
For the broadest balance in this lineup, I’d start with the DigMaster DS360 as my best overall pick, while confirming its capacity, dimensions, and support before purchase. The best value for lighter duties may be the 13.5 HP DigMaster, provided its verified limits cover your jobs. For buyers seeking a more equipped or higher-output configuration, the DigMaster 24 HP 4-in-1 is a strong premium candidate, though the available information does not establish a true premium build or service advantage. The DS360 is also my best starting point for beginners because its 23 HP stand-on format is a straightforward middle ground, but I’d prioritize a demonstration and clear control documentation. For specific needs, choose the Wolfequip if its bucket-and-auger package matches your drilling work, or compare the DigMaster and DigSwift 4-in-1 models for mixed material handling. Before settling on any of them, get written figures for capacity, width, hydraulic performance, warranty, and parts support.













